Standards |
‧IEEE 802.3 10Base-T Ethernet
‧IEEE 802.3u 100Base-TX Fast Ethernet
‧IEEE 802.3u 100Base-FX Fast Ethernet
‧IEEE802.3x Flow Control and Back Pressure |
Data Processing |
‧Store and Forward |
Flow Control |
‧IEEE 802.3x Flow Control and Back Pressure |
Architecture |
‧Full wire speed conversion,
‧Transparent conversion to 802.1Q VLAN tagged packets. |
MAC Table Size |
‧1K |
Packet Buffer Size |
‧1Mbits |
Interface |
‧1 RJ-45 port: 10/100M Base-T(X) Auto negotiation, Auto MDI/MDI-X function, Full/Half duplex
‧1 Fiber port:
- 100BaseFX MM/SC up to 2km, MM/ST up to 2km,
SM/SC up to 30km or
- 100BaseX SFP or
- 100BaseFX WDM SM/SC up to 15km |
LED indicators |
‧Power, Speed, Link/Act
‧Speed (TP port)
‧Link/Act(TP and Fiber port) |
DIP Switch |
‧Link Fault Pass Through (LFP)
‧Converter Mode, Switch Mode |
Power protection |
‧Surge protection diodes on power input |
Connector protection |
‧ESD protection diodes on TX port |
Reserve polarity protection |
‧Present |
Overload current protection |
‧Present |
Power Input |
‧18V-30VAC,
‧12V-48VDC,
‧DC Jack terminal cable supported (DC Barrel Connector ) |
Power Consumption |
‧Max 2.5Watts |
Conformance to UL Standards |
‧Use Isolated power supply to conform with UL 508 standard |
Removable Terminal Block |
‧3 pin contact terminal block for power input |
Operating Temperature |
‧-40℃~75℃ |
Operating Humidity |
‧5% to 95% (Non-condensing) |
Storage Temperature |
‧-40℃~85℃ |
Housing |
‧IP40 Design, high graded Aluminum |
Dimension |
‧58x36x49mm (LxWxD) |
Installation mounting |
‧DIN Rail mounted,
‧Panel Mounted, |
EMC/EMS |
‧CE, FCC, ROHS,VCCI |
Safety |
‧EN60950-1 |