Standards |
‧IEEE 802.3 10Base-T Ethernet
‧IEEE 802.3u 100Base-TX Fast Ethernet
‧IEEE 802.3ab 1000Base-T Gigabit Ethernet
‧IEEE 802.3z 1000Base-X Gigabit Ethernet
‧IEEE802.3x Flow Control and Back Pressure |
Switch Architecture |
‧Back-plane (Switching Fabric): 12Gbps |
Transfer Rate |
‧14,880pps for Ethernet port
‧148,800pps for Fast Ethernet port
‧1,488,000pps for Gigabit Fiber Ethernet port |
Data Processing |
‧Store and Forward |
Flow Control |
‧IEEE 802.3x Flow Control and Back Pressure |
Jumbo Frame |
‧9K Bytes |
MAC Table Size |
‧2K |
Network Connector |
‧RJ-45 Port: 10/100/1000BaseT(X) auto negotiation, Auto MDI/MDI-X function, Full/Half duplex
‧SFP Port: 100/1000BaseSFP slot |
Network Cable |
‧UTP/STP above Cat.5e Cable, EIA/TIA-568 100-ohm (100m) |
Protocol |
‧CSMA/CD |
Flow control |
‧IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex) |
QoS |
‧IEEE 802.1p |
Number of queues |
‧4 |
Traffic Shaper |
‧Port-based Port shaping |
Storm Control |
‧Multicast/Broadcast/Flooding Storm Control per system basis enable/disable |
Dip switch |
‧Dip 1: On/Off - Power alarm
‧Dip 2: On/Off - Broadcast storm rate limit
‧Dip 3~6: Not used |
LED indicators |
‧P1(Green), P2(Green), Alarm (Red)
‧RJ-45:
Link/Act (Green): Ethernet link up
Link/Act (Yellow): On- 1000Mbps ; Off-10Mbps or 100 Mbps
‧SFP:
Link/Act (Green): Ethernet link up
Link/Act (Yellow): On-1000Mbps ; Off-100 Mbps |
Power Supply |
‧Redundant Input Terminals 12-58 VDC |
Operating Temperature |
‧-40 to +75°C (cold startup at -40°C) |
Storage Temperature |
‧-40 to +85 °C |
Operating Humidity |
‧5% to 95% (Non-condensing) |
Case |
‧Rugged Metal, IP30 Protection |
Dimension |
‧112.2(H) x 29.1(W) x 89.4(D) (without DIN rail clip) |
Installation mounting |
‧DIN Rail mounting and Wall Mounting |
Certification |
‧CE/FCC |
EMI |
‧FCC Part 15, CISPR 22 (EN55022) Class A IEC61000-4-2, -3, -4, -5, -6 (Level 3) |