| Standards |
‧IEEE 802.3 10Base-T Ethernet
‧IEEE 802.3u 100Base-TX Fast Ethernet
‧IEEE 802.3ab 1000Base-T Gigabit Ethernet
‧IEEE 802.3z 1000Base-X Gigabit Ethernet
‧IEEE802.3x Flow Control and Back Pressure
‧IEEE802.3af/at PoE |
| Data Processing |
‧Store and Forward |
| Flow Control |
‧IEEE 802.3x Flow Control and Back Pressure |
| Switch Architecture |
‧Back-plane (Switching Fabric): 4Gbps |
| MAC Table Size |
‧2K |
| Jumbo Frame |
‧9KB |
| Packet Buffer Size |
‧1M |
| Interface |
‧1x RJ-45 10/100/1000BaseT(X) PSE with PoE Output power up to 30Watts
or 60Watts
‧1x 100/1000M SFP slot |
| Network Cable |
‧UTP/STP above Cat.5e Cable
‧EIA/TIA-568 10-ohm (100m) |
| Protocol |
‧CSMA/CD |
| POE Pin Assignment |
‧30 watts 2 pairs Mode A End Span
‧V+, V+, V-, V- for pin 1, 2, 3, 6
‧60 watts 4 pairs Mode A End Span V+, V+, V-, V- for pin 1, 2, 3, 6 ;
V+, V+, V-, V- for pin 4, 5, 7, 8 |
| LED indicators |
‧PW1: ON- power good, OFF-power failed (Green)
‧UTP LED: PD detected (Amber) ; Link/active (Green)
‧SFP LED: SFP detected (Green) |
| DIP Switch |
‧Set SFP speed 100M or 1000M |
| Reverse polarity protection |
‧Present |
| Overload current protection |
‧Present |
| Power Supply |
‧4 pin terminal block with 48V-56V VDC Power Input SW ( Relay ): Relay switch for alarm |
| Alarm Relay Contact |
‧Relay outputs with current carrying capacity of 1 A @24VDC,
‧Relay in short circuit mode when power fails.
‧Relay in open circuit mode when power supply is connected |
| Power Consumption |
‧2W @48 VDC Without PoE |
| PoE power |
‧Max. PoE power 36watts at 56VDC input (RP-IMC800FP)
‧Max. PoE power 72watts at 56VDC input (RP-IMC800FP-60W) |
| Removable Terminal Block |
‧Provide 4 pin terminal block
‧Wire range: 0.34mm^2 to 2.5mm^2
‧Solid wire (AWG):12-24/14-22
‧Stranded wire(AWG): 12-24/14-22
‧Torque:5lb-In/0.5Nm/0.56Nm
‧Wire Strip length: 7-8mm |
| Operating Temperature |
‧-40℃~75℃ |
| Operating Humidity |
‧5% to 95% (Non-condensing) |
| Storage Temperature |
‧-40℃~85℃ |
| Housing |
‧Rugged Metal ,IP30 Protection |
| Dimension |
‧103.5 x 32 x 81.5mm (LxWxD) |
| Installation mounting |
‧DIN Rail mounting and Wall Mounting |
| Safety |
‧IEC EN60950-1 |
| EMC/EMS |
‧CE, FCC |
| EMI |
‧FCC Part 15 Subpart B Class A, CE EN 55022 Class A |
| Vibration |
‧EN 50155 / EN 60068-2-6 |
| Shock |
‧EN 50155 / EN 60068-2-27 |
| Free Fall |
‧EN 50155 / EN 60068-2-32 |